Quick Scan Fax Transmission; Basic Sending Operations; Contrast; Resolution - Brother 885MC - IntelliFAX B/W - Fax Owner's Manual

Quick Scan Fax Transmission

You can scan a fax into the fax machine's memory to be sent as soon as the scan is
complete. This way, you don't have to wait for the entire fax to be transmitted before
you retrieve your original.
If you get an OUT OF MEMORY
press Stop/Exit to cancel the scan. If you get an
while scanning in a subsequent page, you'll have the option to press Fax Start to
transmit the pages scanned so far, or to press Stop/Exit to cancel the Quick Scan
operation.
1
Place the original face down in the ADF.
2
Press Quick-Scan. The LCD indicates how much memory is available.
3
Enter the fax number.
4
Press Fax Start to begin scanning the document into memory. Once the scan is
complete, the fax machine dials the call.

Basic Sending Operations

Contrast

If your original is very light or very dark, you might want to set the contrast accordingly.
Use S.LIGHT
1
Place the original face down in the ADF.
2
Press Menu/Set, 3, 3.
3
or
Press to select AUTO,
4
Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the Setup Send menu.
5
Enter a fax number, and then press Fax Start to send a fax—OR—Press Copy to
make a copy.

Resolution

When you have an original in the ADF, you can use the Resolution key. Press
Resolution continuously until you see your selection on the LCD.
STANDARD—suitable for most typed originals.
FINE—good for small print; transmits a little slower than standard resolution.
S. FINE—good for small print or artwork; transmits slower than fine resolution.
PHOTO—use when original has varying shades of gray; slowest transmission time.
to send a very light original. Use
S.LIGHT
message while scanning the first page of a fax,
OUT OF MEMORY
S.DARK
or S.DARK, and then press Menu/Set.
S E T U P S E N D
message
to send a very dark original.
6 - 3