Configuring Audio For Windvd Player; Using Headphones; Using A 2.1 Speaker System With Headphones - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual

Configuring Audio for WinDVD Player

Follow these steps after you have installed, connected, and configured your
speakers.
The InterVideo WinDVD program (select models only) is set up for two-speaker
(stereo) output. To hear all speakers from DVD movies recorded with multichannel
audio, change the audio properties for WinDVD to match your speaker
configuration (if your InterVideo WinDVD program supports more than two
channels).
If you want to play a stereo DVD, you may change the audio properties of WinDVD
to match the recorded DVD audio output.
1 Insert a DVD.
Or
Click Start, choose All Programs, InterVideo WinDVD, InterVideo
WinDVD Player, and then click InterVideo WinDVD. The WinDVD video
window opens.
2 Right-click anywhere in the WinDVD video window, and then click Setup. The
Setup window opens.
3 Click the Audio tab.
4 Select Audio Output Configuration. Choose Analog or Digital
(S/PDIF). Click Apply.
5 Select Audio Speaker Configuration. Click the option for the number of
speakers to match your multichannel speaker system.
6 You can click the Test button to test the speakers. You should be able to hear
the speakers. Click Stop, and then click OK.

Using Headphones

Your PC comes with a headphones connector (lime-green) on the front of the
PC. The headphones connector is labeled with a headphones icon.
You can also connect headphones to the Line Out connector (lime-green) on
the back of your PC.

Using a 2.1 speaker system with headphones

For select models with the 2.1 speaker system, look for the headphones connector
on the right side of the main speaker. When headphones are plugged in, the sound
to the speakers and the subwoofer is muted.
Configuring Speaker and Sound Options
47