Configuring Multi-Channel Audio Output For The Dvd Player; Setting Up 6-Connector Sound - HP Compaq Presario,Presario SR1010 Getting Started Manual

14
Getting Started Guide
Configuring multi-channel audio output for the
DVD player
The InterVideo WinDVD program (select models only) is set up for two-speaker
(stereo) output. To hear all speakers from DVD movies recorded with multi-channel
audio, change the audio properties for WinDVD to match your speaker
configuration (if your InterVideo WinDVD program supports more than two
channels):
1 Insert a DVD, or start InterVideo WinDVD. (Click Start, All Programs,
InterVideo WinDVD, InterVideo WinDVD Player, and InterVideo
WinDVD.)
2 Right-click anywhere in the WinDVD video window, and then click Setup. The
Setup window opens.
3 Click the Audio tab.
4 Click the option for the number of speakers to match your multi-channel speaker
system.
5 Click Apply.
To test the speakers (multi-channel speakers only), click the Test button.
NOTE:
The WinDVD control panel shows the speaker number being used. Click Stop.
6 Click OK.
If you want to play a stereo DVD, change the audio properties of WinDVD to
NOTE:
match the recorded DVD audio output.

Setting Up 6-connector Sound

PC models that include six sound connectors on the back of the PC, support up to
eight channels of sound (7.1 speaker output).
Identifying the audio connectors (6-connector)
The PC supports a maximum of eight speakers in a multi-channel speaker system by
using four of the six audio connectors on the back of the PC.
This PC also has Digital Audio Out and Digital Audio In connectors for digital sound
devices such as a DVD recorder or a digital stereo receiver/amplifier.