Configuring Audio Output - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual

36
Getting Started Guide
To connect digital audio speakers:
1 Turn off the PC.
2 Connect the digital input (S/PDIF) on the digital speakers or a digital audio
system to the orange digital out connector that matches the back of your PC:
• Type 3 is three connectors
• Type 6 is six connectors
• Type S is sound card
DIGITAL DIGITAL
6
3
AUDIO OUT AUDIO OUT
3 Turn on the PC.
NOTE: Always turn on the PC before you turn on the speaker system.
4 Plug in the speaker system power.
5 Turn on the speaker system.
6 After the speakers are connected to the PC, configure the audio software for
sound output for your PC model:
• Audio card with digital output and type 3 connectors: See "Configuring
Audio Output with Multi-channel Sound Manager" on page 37. Follow the
instructions to enable digital audio output.
• Audio card with digital output and type 6 connectors: See "Configuring
Audio Output with Sound Effect Manager" on page 38. Digital audio
output is already enabled as the default.

Configuring Audio Output

You can configure your speaker's audio output with the following software. Use the
software that applies to your PC model:
• WinDVD Player
• Multi-channel Sound Manager (type 3 connectors)
• Sound Effect Manager (type 6 connectors)
• Realtek HD Sound Effect Manager (multi-streaming audio)
S