Connecting 4.1 (4 Speakers And A Subwoofer) Audio Speakers - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual

26
Getting Started Guide
7 Plug in the speaker system power.
8 Turn on the speaker system.
Step 8 is optional for a two-speaker setup.
9 After the speakers are connected to the PC, configure the audio software for
sound output for your PC model:
• Type 3 connectors: See "Configuring Audio Output with Multi-channel
Sound Manager" on page 37.
• Type 6 connectors: See "Configuring Audio Output with Sound Effect
Manager" on page 38.
The following diagram shows a typical 2.1 audio installation:
Connecting 4.1 (4 speakers and a subwoofer)
audio speakers
To connect two front speakers, two rear speakers, and a subwoofer for four-channel
(4.1 speaker) output:
1 Turn off the PC.
.
2 Connect the front speaker cable to the lime-green Audio Line Out connector that
matches the back of your PC.
3
6
• Type 3 is three connectors
• Type 6 is six connectors
• Type S is sound card
S