Using The Memory Card Reader - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual

50
Getting Started Guide

Using the Memory Card Reader

1 Insert the media into the card slot until it stops.
The activity light (A) on the memory card reader lights, and the PC
automatically detects the media.
Media must be inserted correctly. Note the direction of the notched
NOTE:
corner on the media. See the "Media Insertion Guide" on page 51.
CompactFlash and Microdrive are keyed and cannot be inserted incorrectly.
Insert the receptacle edge (holes) of this media into the slot.
2 The PC opens a window so you can use the media contents. You can copy files
from or to the media.
3 When you are finished, right-click the drive icon, select Eject, check that the
activity light is on but not blinking, and then remove the media. A steady
activity light indicates that the PC is not reading or writing the media.
WARNING: Do not try to remove media when the activity light is
blinking; doing so may cause loss of data.