Connecting 7.1 (7 Speakers And A Subwoofer) Audio Speakers - HP A1210n - Pavilion - 512 MB RAM Getting Started Manual
Getting started guide
Hide thumbs
Also See for A1210n - Pavilion - 512 MB RAM:
- Getting started manual (106 pages) ,
- Software manual (64 pages) ,
- Maintenance manual (26 pages)
Table of Contents
Advertisement
8 Plug in the speaker system power.
9 Turn on the speaker system.
10 After the speakers are connected to the PC, configure the audio software for
sound output for your PC model:
•
Type 3 connectors: See "Configuring Audio Output with Multi-channel
Sound Manager" on page 37.
•
Type 6 connectors: See "Configuring Audio Output with Sound Effect
Manager" on page 38.
•
Type 6 connectors — multi-streaming: See "Configuring Audio Output with
Realtek HD Sound Effect Manager" on page 41.
The following diagram shows a typical 5.1 audio installation:
Connecting 7.1 (7 speakers and a subwoofer)
audio speakers
To connect two front speakers, two side speakers, two rear speakers, a center
speaker, and a subwoofer for eight-channel (7.1 speaker) output:
1 Turn off the PC.
.
2 Connect the front speaker cable to the lime--green Audio Line Out connector on
the back of your PC.
3 Connect the rear speaker cable to the black connector on the back of your PC.
Configuring Speaker and Sound Options
29
Advertisement
Table of Contents
