Screen Size Adjustment - Eiki LC-XB28 Owner's Manual

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.
1 Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to the Screen Menu icon.
2 Press the Point d button and move the red frame
pointer to the function that you want to select and
then press the SELECT button.
Normal
Provide image to fit the screen size.
True
Provide image in its original size. When the original image
size is larger than the screen size (1024 x 768), this
projector enters "Digital zoom +" mode automatically.
Wide
Provide image to fit wide video aspect ratio (16 : 9) by
expanding image width uniformly. This function can be
used for providing a squeezed video signal at 16 : 9.
For zooming in and out the images
Digital zoom +
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message "D. Zoom +" is displayed.
Press the SELECT button to expand the image size. And
press the Point ed7 8 buttons to pan the image. The
Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM ▲ button on the remote control.
Digital zoom –
When the Digital zoom – is selected, the On-Screen Menu
disappears and the message "D. Zoom –" is displayed.
Press the SELECT button to compress the image size.
A projected image can be also compressed by pressing the
D.ZOOM ▼ button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ▲▼ buttons, SELECT, and Point button.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment or select an input source
from the Input source from the Input Source Selection (p24)
again, or adjust the screen size with the D.ZOOM buttons.
Screen Menu
Move the red frame to the
function and press the
SELECT button.
✔
Note:
• This Screen Menu cannot be operated when
720p(HDTV), 1035i (HDTV), or 1080i (HDTV)
is selected in the PC System Menu (p25).
• The True and Digital zoom +/– cannot be
selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p25).
• This projector cannot display any resolution
higher than 1600 X 1200. If your computer's
screen resolution is higher than 1600 X 1200,
reset the resolution to the lower before
connecting to the projector.
• The image data in other than XGA (1024 x
768) is modified to fit the screen size in initial
mode.
• The panning function may not operate properly
if the computer system prepared in the PC
Adjust Menu is used.
• The minimum compression ratio can be limited
depending on the input signal or when the
Keystone function is working.
Remote Control
ON - OFF
COMPUTER VIDEO
POINT buttons
MENU MENU VOLUME VOLUME - SELECT VOLUME VOLUME +
SELECT button
D.ZOOM + button
D.ZOOM D.ZOOM PAGE KEYSTONE TONE NO SHOW
D.ZOOM - button
P - TIMER
AUTO P AUT O PC
IMAGE FREEZE MUTE
Computer Input
Screen Menu icon
31