Video Input; Input Source Selection (Video, S-Video) - Eiki LC-XB28 Owner's Manual

Video Input

Input Source Selection (Video, S-Video)

Direct Operation
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
2
Press the Point d button to move the red arrow
pointer to Video and then press the SELECT button.
The Source Select Menu will appear.
3 Move the pointer to the source that you want to select
and then press the SELECT button.
When
Auto
automatically detects incoming video signal, and
adjusts itself to optimize its performance. The
projector selects connection in the following
order:
1st S-Video
2ndVideo
The S-VIDEO jack has priority over the VIDEO
jack under the condition of connecting both the
S-VIDEO jack and the VIDEO jack.
When video input signal is connected to the
Video
VIDEO jack, select Video.
When video input signal is connected to the S-
S-Video
VIDEO jack, select S-Video.
✔
Note:
When Monitor out is selected at the Terminal item in the Setting
Menu, Computer 2 is not displayed. (p41)
32
selecting Auto, the
Top Control
ON - OFF
INPUT
KEYSTONE
Remote Control
COMPUTER VIDEO
VOLUME -
MENU
✳ See Note at the bottom of this page.
Input Menu
D.ZOOM PAGE
IMAGE
VIDEO
projector
INPUT button
POWER
INPUT button
WARNING
Video
LAMP
REPLACE
SELECT
Computer 1
Computer 2
VIDEO button
VIDEO button
ON - OFF
Video
VOLUME +
SELECT
Input Menu icon
KEYSTONE NO SHOW
P - TIMER
AUTO PC
FREEZE MUTE
Move the pointer
to Video and press
the SELECT
button.
Source Select Menu (VIDEO)
Move the pointer to the
source that you want to
select and press the
SELECT button.
✳