Auto Pc Adjustment - Eiki LC-XB28 Owner's Manual

Computer Input

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to
conform to your computer. Auto PC Adjustment function can be operated as follows.
Direct Operation
The Auto PC adjustment function can be operated directly by
pressing the AUTO PC button on the remote control.
Menu Operation
Auto PC Adj.
1 Press the MENU button to display the On-Screen
Menu. Press the Point 7 8 buttons to move the red
frame pointer to PC Adjust Menu icon.
2
Press the Point d button to move the red frame
pointer to Auto PC Adj. icon and then press the
SELECT button twice.
This Auto PC Adjustment can be also executed by
pressing the Auto PC button on the remote control
unit.
To store adjustment parameters
Adjustment parameters from Auto PC Adjustment can be
memorized in this projector. Once parameters are
memorized, the setting can be done just by selecting Mode
in the PC System Menu (p25). See "Store" on page 28.
✔Note:
• Fine sync, Total dots and Picture Position of some computers can
not be fully adjusted with this Auto PC Adjustment function. When
the image is not provided properly with this operation, manual
adjustments are required. (p27, 28)
• The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu. (p25)
26
ON - OFF
COMPUTER VIDEO
Remote Control
VOLUME - VOLUME +
MENU SELECT
D.ZOOM D.ZOOM PAGE KEYSTONE TONE NO SHOW
AUTO PC button
P - TIMER
AUTO P AUT O PC
IMAGE IMAGE FREEZE MUTE MUTE
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer
to the Auto PC Adj. icon
and press the SELECT
button.
"Wait a moment!" message
will appear while Auto PC
adjustment is in process.