Connecting To A Computer - Eiki LC-XB28 Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• USB Cable ✽
• Audio Cables (Mini Plug: stereo) ✽
(✽ = Not supplied with this projector.)
Monitor Input
VGA cable ✽
COMPUTER IN 2/ MONITOR OUT
✔
Note:
ed
• If you wish to use PAGE
port of your computer to the USB socket of the projector. (p9 and 42)
• When connecting AUDIO OUT to external audio equipment, the projector's
built-in speaker is disconnected.
• When the cable is of the longer variety, it is advisable to use the
COMPUTER IN 1 / COMPONENT IN and not the COMPUTER IN 2 /
MONITOR OUT.
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when
using the COMPUTER IN 2/ MONITOR OUT terminal as input.
Note:
When connecting the cable, the power cords of both the projector
and the external equipment should be disconnected from AC
outlet.
Audio Output
USB cable ✽
USB port
VGA cable
Monitor Output
COMPUTER IN 1/ COMPONENT IN
(or COMPUTER IN 2/ MONITOR OUT)
AUDIO IN AUDIO IN
COMPUTER IN 1
COMPUTER IN 1
R
R
DVI - I
/ COMPONENT IN
SERVICE PORT
SERVICE PORT
RESET RESET
COMPUTER IN 2 /
COMPUTER IN 2
COMPONENT IN /
MONITOR OUT
/
MONITOR OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 41.)
buttons on the remote control, connect USB
Audio cable (stereo) ✽
USB COMPUTER/ COMPONENT
AUDIO IN
L VIDEO VIDEO USB USB
L (MONO) (MONO)
S-VIDEO S-VIDEO
COMPUTER /
COMPUTER
/ COMPONENT COMPONENT
AUDIO IN
AUDIO IN
AUD
AUDIO OUT
ARIALE)
(VARIABLE)
AUDIO OUT
(stereo)
Installation
External Audio Equipment
Audio Input
Audio cable ✽
(stereo)
15