Nortel BCM 4.0 Upgrade Manual page 34

34 Chapter 4 Upgrading to BCM 4.0 and SRG 1.5
Figure 11 Final upgrade screen with green BCM status LEDs
17 Perform the post-upgrade activities that apply to your system shown in
"Post-upgrade activities," on page
The BCM 4.0 system is back in service. Specific functionality described in
"Post-upgrade activities," on page 19
been performed.
If you receive any condition messages during system verification or during the upgrade, or to
review the log files, refer to
N0060597 N0060597
19.
is not accessible until the post-upgrade activities have
Appendix A, "Troubleshooting," on page
Chapter 3,
Chapter 3,
39.