Second Step; Final Step - Nortel BCM 4.0 Upgrade Manual

10 Chapter 1 Getting started

Second step

Perform the upgrade using the information in
on page 6.
The chapter describes:
• Upgrading BCM200/400 and BCM1000 systems
• Upgrading an SRG 1.0 system
• Upgrading a BCM400 Expansion Gateway
• step-by-step instructions to guide you through the upgrade using the Upgrade Wizard
Condition messages might appear during the upgrade. Refer to
on page 27 for more information about condition messages.
When the upgrade completes successfully, go to the Final step.

Final step

After a successful upgrade, go to
This chapter describes:
• the configuration information that must be re-entered since it was not preserved by the upgrade
process.
• the reinstallation of all client applications supported by BCM 4.0 on all desktop systems.
All of these activities might not apply to your system, but review them and perform the relevant
activities.
N0060597 N0060597
Chapter 1, "Upgrading to BCM 4.0 and SRG 1.5,"
Chapter 1, "Post-upgrade activities," on page
Appendix A, "Troubleshooting,"
19.