Accessing The Adapter Properties Window - Lenovo ThinkServer RD240 Hardware Maintenance Manual

Table 40. Items on the Global Properties window
Pause When Boot Alert Displayed
Boot Information Display Mode
Support Interrupt
Restore Defaults

Accessing the Adapter Properties window

In the Adapter List window, select C1068E and press Enter. The Adapter Properties window for SAS1068E
opens.
Table 41. Items in the Adapter Properties window for SAS1068E
Adapter
PCI Slot
PCI Address (Bus/Dev)
MPT Firmware Revision
SAS Address
Status
Boot Order
Boot Support
RAID Properties
126
ThinkServer RD240 Hardware Maintenance Manual
Item
Item
Description
Indicating whether to stop the boot when the alert occurs
during the boot. The current property can be changed by
pressing + or -.
No: Select this option if you want to continue to boot
when the alert occurs.
Yes: Select this option if you want to pause the boot
when the alert occurs and then you can press any key
to continue.
Defining what will be displayed in the BIOS interface
during the boot. The current property can be changed by
pressing + or -.
Indicating the supported interrupt mode. Hook interrupt,
the Default is the default value, which supports booting
from CD-ROM in floppy emulation mode.
Restoring default settings
Description
The SAS adapter(s) detected
The PCI slot number assigned to the adapter
The PCI device or function assigned to the adapter
The current firmware version
The current SAS address
Indicating whether the adapter on the boot list is enabled
or disabled
Indicating the boot sequence
Defining the software control mode of the adapter.
Enabled BIOS & OS: When this option is enabled, it
means that the adapter is controlled by both the BIOS
and the driver on the operating system.
Enabled BIOS Only: When this option is enabled, it
means that the adapter is controlled by only the BIOS,
instead of the driver on the operating system. This
option might not be supported by all the operating
systems, such as Windows operating systems.
Enabled OS Only: When this option is enabled, it
means that the adapter is controlled by only the
operating system.
Disabled: When this option is enabled, the adapter
is disabled.
Set the Host RAID. See "SAS RAID settings" on page 127.