Accessing The Adapter Properties Window - Lenovo ThinkServer RD240 Installation And User Manual

Table 27. Items in the Adapter List window (continued)
PCI Bus
Dev/Fnc
FW Revision
Status
Boot Order
You can press Alt+N to switch to the Global Properties window to set the
properties of boot and interrupt.
Table 28. Items on the Global Properties window
Pause When Boot Alert Displayed
Boot Information Display Mode
Support Interrupt
Restore Defaults

Accessing the Adapter Properties window

In the Adapter List window, select C1068E and press Enter. The Adapter Properties
window for SAS1068E opens.
Table 29. Items in the Adapter Properties window for SAS1068E
Adapter
PCI Slot
PCI Address (Bus/Dev)
MPT Firmware Revision
SAS Address
Status
Boot Order
Item
Item
Item
Description
The PCI bus number assigned for the
adapter.
The PCI Device/Function assigned for the
adapter.
Indicates the current Firmware version.
Indicates that the adapter in the boot list is
enabled or disabled.
Indicates the boot sequence. You can change
the sequence by pressing + or -.
Description
Indicates stop the boot or not when the alert
occurs during the boot. The current property
can be changed by pressing + or -. The
option No indicates that you can continue to
boot when the alert occurs. The option Yes
indicates that you can pause boot when the
alert occurs and press any key to continue.
Defines how much BIOS information to be
displayed during the boot. The current
property can be changed by pressing + or -.
Indicates the supported interrupt mode.
Hook interrupt, the Default is the default
value, which supports the boot from
CD-ROM in the floppy emulation mode.
Restores the defaults.
Description
Detected SAS adapter.
The PCI slot number assigned for the
adapter.
The PCI Device/Function assigned for the
adapter.
Indicates the current Firmware version.
Indicates the current SAS address.
Indicates that the adapter in the boot list is
enabled or disabled.
Indicates the boot sequence.
Chapter 6. Configuring the server
85