Configuring Raid; Typical Operating System Installation; Onboard 1068E Sas Raid Controller Configuration Utility Program - Lenovo ThinkServer RD240 Hardware Maintenance Manual

• About: This selection displays version information and legal notices.

Configuring RAID

The RAID configuration feature that is part of the EasyStartup program enables you to view and change RAID
settings for supported RAID controllers. Through this feature, you have the ability to configure each installed
controller. The program automatically detects the number of discs currently attached to the controller,
determines the possible RAID configurations that can be configured, and prompts you through the steps
to configure one or more disk arrays with or without hot-swap hard disk drives. As you configure each
controller you will be given the option to save the RAID configuration settings to a RAID response file, which
you can use on other similarly configured Lenovo servers. This method satisfies most users' needs.

Typical operating system installation

When you select Install operating system, you will be prompted for information required for the installation.
The prompts vary depending on the operating system selected. This section describes the tasks associated
with a typical Windows operating system installation. Each task must be completed in order before moving
to the next task.
Note: Ensure that your RAID controller is correctly configured before you select an operating system to install.
• Select operating system: This task enables you to select the operating system that you will be installing.
• Select disk: This task enables you to select the disk where you want to install the operating system.
Note: The disk that you select must be set as the boot disk in the BIOS.
• Partitions options: This task enables you to choose whether you want to repartition the selected drive
or use an existing partition.
• Partition settings: This task enables you to choose the file system type and define the partition size.
• Installation settings: This task prompts you for user and system settings, the operating system product
key, and the administrator password.
• Network settings: This task prompts you for domain and workgroup settings, Ethernet controller type, IP
address settings, DNS settings, and WINS address settings.
• Install applications: This task enables you to run custom commands or scripts at the end of the
installation process and install ThinkServer EasyManage software to help you manage your servers.
• Install Windows components: This task enables you to install optional Windows components such
as IIS, ASP.NET, and SNMP.
• Confirm settings: This task enables you to review all of the information you provided.
• Save response file: This task gives you the option of saving the information on a diskette or USB device
as a response file for future installations on similarly configured Lenovo servers.
• Start installation: This task starts the actual installation process. First, the disk is prepared using the disk
and partition information you specified. Then you are prompted to insert the operating system disk, and
the operating system is installed using the information that you specified.

Onboard 1068E SAS RAID controller Configuration Utility program

This section provides some basic instructions on how to configure the onboard SAS RAID using the onboard
1068E SAS RAID controller Configuration Utility program.
.
Chapter 9 Configuring the server
123