Scanning Documents To Your Computer - HP C4106A - LaserJet Companion Xi User Manual

Scanning Documents to Your Computer

These procedures describe scanning a document and sending the image
to your computer, which is the first step to faxing, filing, and using the
OCR software.
To scan a document
Raise the paper tray and paper supports.
1
Place the document face up and top down in the paper tray, and adjust
2
the paper edge guides by sliding them to the edges of the document.
Press
3
Figure 3-4
The scan will begin and a thumbnail image of the page appears as the
document is being scanned. When the scan is complete, the thumbnail
image will disappear and the PaperPort software will automatically
display the scanned image in Desktop View.
For information on how to give an item a new title, see "Giving Titles to
N o t e
Items" in chapter 2.
If you need to stop the scan, press
document, see "Removing Paper" in chapter 7.
If you press
T i p
Companion, the PaperPort software will start. For more information on
the PaperPort software, see chapter 2, "Working in the PaperPort
Software."
EN
[To[PC]
on the HP LaserJet Companion.
[To[PC]
and there is no paper in the HP LaserJet
[To[PC]
again. To remove the
Using the HP LaserJet Companion 3-7