Turning The Power Off (Putting The Projector Into Standby Mode) - Eiki EIP-3000N Owner's Manual

Turning the Power off (Put-
ting the Projector into
Standby Mode)
Press oSTANDBY-ON on the pro-
1
jector or eSTANDBY on the re-
mote control, then press that but-
ton again while the confirmation
message is displayed, to put the
projector into standby mode.
Unplug the power cord from the AC
2
outlet after the cooling fan stops.
• The power indicator on the projector
blinks in red while cooling.
• The power indicator changes to green
when the projector finishes cooling.
On-screen Display (confirmation message)
Info
• Do not unplug the power cord during projec-
tion or cooling fan operation. This can cause
damage due to rise in internal temperature,
as the cooling fan also stops.
Power indicator
STANDBY-ON button
STANDBY
button
R
29