Picture Adjustment ("Picture" Menu); Selecting The Picture Mode - Eiki EIP-3000N Owner's Manual

Picture Adjustment ("Picture" menu)

Q Example: "Picture" screen menu for
INPUT 1 (RGB) mode
Picture SCR
Picture Mode
Contrast
Bright
Red
Blue
CLR Temp
Bright Boost
Lamp Setting
Reset
SEL./ADJ.

1 Selecting the Picture Mode

1 1
1 1
Selectable
items
Standard For standard image
Presentation
Brightens portions of image for
more enhanced presentations.
Movie
Gives natural tint to the
projected image.
Game Gives sharpness to the
projected image.
*sRGB For high fidelity reproduction of
images from a computer.
• "sRGB" is displayed only when RGB signal is input.
• You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are
retained in memory.
Note
• You can also press G PICTURE MODE on the remote control to select the picture mode. (See
page 36.)
• *sRGB is an international standard of color reproduction regulated by the IEC (International
Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are
displayed in a natural tint based on an original image, when "sRGB" is selected.
For additional information about the sRGB function, visit "http://www.srgb.com/".
You cannot set the items, "Red", "Blue", "CLR Temp", "Bright Boost", when "sRGB" is selected.
Info
• When "sRGB" is selected, the projected image may become dark, but this does not indicate a
malfunction.
42
PRJ Net. Help
Standard
0
0
0
0
7 5 0 0 K
1
Bright
ENTER END
Description
Q Example: "Picture" screen menu for
INPUT 3 mode
Picture
Picture Mode
Contrast
Bright
Color
Tint
Sharp
CLR Temp
Bright Boost
Progressive
Lamp Setting
Reset
SEL./ADJ.
The default settings of each item when selecting Picture Mode
CLR Temp Bright Boost
7500K
7500K
6500K
7500K
–
Menu operation n Page
SCR PRJ Net.
Standard
0
0
0
0
0
7 5 0 0 K
1
3D Progressive
Bright
ENTER
Lamp Setting
1 Bright
2 Bright
0 Eco + Quiet
2 Bright
– Bright
40
Help
END