Install Setting Menu - Sony HDMI VPL-BW5 Operating Instructions Manual

INSTALL SETTING Menu
The INSTALL SETTING menu is used for changing the settings of the projector.
INSTALL SETTING
V Keystone: Auto
Imaga Flip: 011
Background: Blue
Lamp Mode: Standard
High Altltud. Mod.: 011
,... n u-
Setting items Functions Initial setting
V Keystone
Corrects the trapezoidal distortion caused by the Auto
projection angle.
Select "Auto" for automatic correction, or "Manual" for
manual correction using the t/"I. .I. . buttons.
When the bottom of the trapezoid is longer than the
top
0 :
Sets a lower value.
When the top of the trapezoid is longer than the
bottom
0 :
Sets a higher value.
Image Flip
Flips the image on the screen horizontally and/or
Off
vertically.
HV: Flips the image horizontally and vertically.
H: Flips the image horizontally.
V: Flips the image vertically.
Off: The image does not flip.
Background
Selects the background color of the screen when no Blue
signal is input.
Select "Black" or "Blue." Normally, set to "Blue."
lamp Mode
Sets the lamp brightness used during the projection. Standard
High: Illuminates the projected image brightly.
Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the "High" setting.
High Altitude
Set to "On" when the projector is used at an altitude Off
Mode
of 1,500 m or higher.
42