Scan Complete Sound Setting; Initial Resolution Setting; Default Exposure Settings; Batch Print Settings - Sharp MX-M450NA Administration Manual

DOCUMENT FILING SETTINGS

Scan complete sound setting

The volume of the beep that alerts you when scanning
of an original has finished can be adjusted to two
levels.
The beep can also be turned off.

Initial resolution setting

This is used to change the default resolution setting for
"SCAN TO HDD" of the document filing function. The
default resolution is initially set to "600x600dpi". To
change the default resolution, touch the key of the
desired resolution.

Default exposure settings

This is used to change the default exposure level for
"SCAN TO HDD" of the document filing function. The
default exposure is initially set to "AUTO". If changed to
"MANUAL", the exposure level can be adjusted to five
levels. Level 1 is the lightest level and level 5 is the
darkest level.

Batch print settings

When printing files by batch printing, this setting is
used to prohibit the selection of the [ALL USERS] key
and the [USER UNKNOWN] key in the user selection
screen.

Default display setting

The default screen that appears when the
[DOCUMENT FILING] key is pressed can be specified.
Select either the base screen of document filing mode
or the external application selection screen. This
setting can only be configured when the application
communication module is installed.
When the [CA] key ([Clear all] key) is pressed in
document filing mode or Sharp OSA mode, the initial
screen of the mode appears, regardless of the default
display setting.
19