Kyocera KM-3050 Operation Manual page 37

Staple cartridge holder B/C
Follow the steps below to remove jammed staples from the optional folding unit.
1
Push the folding unit release lever and pull out the
folding unit.
2
Remove staple cartridge holder B or C.
3
Open the cover plate (B) of the staple cartridge
holder and remove any jammed staples.
4
Close the cover (B) plate of the staple cartridge
holder into its original position.
5
Re-install the staple cartridge holder.
When re-installing, align the triangle marks on the
staple cartridge holder and the staple unit. The
staple cartridge holder will click into place when it
has been inserted correctly.
6
Push the folding unit back into position.
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE
English
35