Maintenance - Kyocera KM-3050 Operation Manual

English

Maintenance

Replacing Staples
The finisher contains staple cartridge holder A.
The optional folding unit contains staple cartridge holders B and C. The refill procedure for
staple cartridge holders B and C are the same as for staple cartridge holder A.
If a message displays indicating that staples have run out, the staple cartridge holder need
to be replenished with staples.
NOTE:
place of purchase.
Refilling Staple Cartridge Holder A
Follow the steps below to refill staples.
NOTE:
1
While pushing the finisher release lever, pull the
finisher out from the machine.
2
Open the right cover (D8).
3
Remove the staple cartridge holder.
16
If the Staple Unit runs out of staples, contact your service representative or the
See page 17 to refill staple cartridge holder B/C of the optional folding unit.
DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE