Kyocera KM-3035 Operation Manual page 64

System Setting
• Registration button
• Reset button
• DB Assistant
[Set up]-[Administrator]
• E-mail address
• Change password
• Old password
Click on this button to have all of the selected settings registered in the Scanner Interface Card.
Click on this button to return all of the settings back to their factory default values.
Type the IP address or the host name of the PC which DB Assistant is installed (up to 32 single-byte
characters) in this field.
IMPORTANT! If you go to another screen without clicking on the Registration button, any settings
that have not been properly registered will be deleted and, therefore, will NOT be
registered in the Scanner Interface Card.
Type the e-mail address of the administrator here. File, such as Log file of the scanner and error report will
be sent to "E-mail address of the Administrator" as E-mail.
If you want to change the administration password, select "Yes". If you do NOT want to change it, select
"No".
If a password is currently registered, type that password into this filed.
Page 2-15