Using the Scanner Function
2 . "Scan to PC-Sending" will be displayed on the left side of the Scan to PC screen shown in step 1. This
3 . "Scan to PC-Multiple TX (Continuous TX)" will now be displayed on the left side of the Scan to PC
indicates that you are using the standard transmission mode. To switch to the Multiple Scanning
(Continuous Sending) function, touch the "Multiple Scan(Contin. TX to)" key.
screen. This indicates that you are now using the Multiple Scanning (Continuous Sending) function. To
switch back to standard transmission, touch the "Single Scan (Sending to)" key.
Page 1-28