Uncompress Scanning" Setting - Kyocera KM-3035 Operation Manual

Using the Scanner Function

"Uncompress scanning" setting

This scanner uses MMR compression when scanning image data. In this case, when compressing the dots
(especially the closely spaced dots which make up the more dense areas of, for example, photographs in
printed material, and can be seen when looking closely with a magnifying glass) such as in photographs and
grayscale images, the resulting data volume may actually be greater than before it was compressed. You
can select whether or not to have compression performed automatically in cases such as these when the
compressed data is greater that the original data.
<Making the setting> (In this case of scanners that possess a touch panel.)
1.Press the Default Setting / Counter (*) key on the scanner's operation panel and then access the Func.
2. Use the "L" and "M" cursor keys to select "Uncompress scanning" and then touch the "Change #" key.
Def. setting screen on the touch panel. Refer to "(3) Making settings from the touch panel" on page 2-2
of the Set-Up Edition of your Operation Guide for the procedure on accessing the Func. Def. setting
screen.
The Change Settings screen will appear.
Page 1-24