Kyocera KM-3035 Operation Manual page 254

Error messages
Message
Communication error.
Destination PC's system error.
The file was not saved.
Check the destination PC.
Destination PC's application is out of order.
If you are using the Scan to PC function, check the
status of the destination computer and then try the
operation again.
If you are using the Send E-mail function, check to
make sure that the SMTP server is running, or consult
with your network administrator.
If you are using the DB Assistant function, check to
make sure that the DB Assistant is installed on the
computer.
Check the status of the destination computer and then
try the operation again.
If the amount of data exceeds the maximum hard disk
capacity as registered in the Scanner File Utility on
the destination computer, increase the available
space on your computer's hard disk and then try the
operation again.
If data with the same file name has been sent from
more than one scanner at a time, the data can not be
saved. Wait for awhile and then try the operation
again, or change the file name.
Check to make sure that the Scanner File Utility is
running in the destination computer.
Page B-4
Procedure