Sending Scanned Image Data To Ftp Server - Kyocera KM-3035 Operation Manual

Sending Scanned Image Data to FTP server

Upload the scanned data from the scanner to the FTP server directly.
The following shows the basic scanning flow to the FTP server. For a more detailed explanation of each
step, refer to the indicated reference page. Click on the reference page will take you directly to the proper
page.
* This function is not available by KM-1650/2050/2550/C850.
Making basic settings
To use Scan to FTP function, you need to specify
the network settings and register the FTP server
on the web browser.
Settings and registra-
tion using an Internet
Web browser
Sending scanned image data
Use the scanner to designate the FTP server and
send scanned image data directly.
See page
2-1
* Network settings as well
v
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.