Kyocera KM-3035 Operation Manual page 252

Error messages
If one of the following message appears during scanning, perform the corresponding procedure.
Message
Unable to use scanner.
Unable to find destination PC. Check the PC.
This name is already in use. Input new name
again.
This number is already in use. Input new
number again.
Registration full.
E-mail size exceeds data capacity.
Check to make sure that the network cable is
connected securely and properly. If this message
appears immediately after turning the scanner ON,
wait for awhile (approx. 2 minutes) while the scanner
warms up.
There is a problem at your computer. Check to make
sure that the Scanner File Utility is running and the
computer is able to receive data.
Register a different name.
Register a different number.
Delete any unnecessary items and try the procedure
again.
Reduce the number of pages being transmitted, or
lower the scanning resolution, and try to transmit
again.
Page B-2
Procedure