Cabletron Systems MMAC-Plus 9A128-01 Management Manual page 10

9A128-01 and 9A129-01 Module Specific Information
ATM Connection Add/Delete Entry Screen Fields
The following information briefly explains each ATM Connection Add/Delete
Entry Screen field.
Port
The MIB II interface that the PVC is being created on.
VPI
Use this field to enter the VPI of the PVC you want to add, delete, or modify. The
acceptable value for this field is 0.
VCI
Use this field to enter the VCI of the PVC you want to add, delete, or modify. This
field allows values of 0–1023.
AAL Type (Toggle)
Use this field to select the ATM Adaptation Layer for the PVC you want to add,
delete, or modify. Press the Space Bar to toggle the selections, which are:
• AAL-3/4
• AAL-5 ( default )
Encapsulation Type (Toggle)
Use this field to select the data encapsulation type used over AAL-5. Press the
Space Bar to select one of the following:
• VC Mux Bridged 802.3
VC Based Multiplexing for bridged protocols as defined by the IETF
RFC 1483.
• LLC Encapsulation
Logical Link Control for Bridged Protocols as defined by the IETF RFC 1483.
8