Yamaha 02R Version 2 Manual page 87

82 Mixing and Automix
02R Getting Started Guide
• EF.Lib.—effect library recall. The number indicates the effect
library number (from 1 to 128).
• CH.Lib.—channel library recall. The number indicates the
channel library number (from 1 to 64).
• Channel—the channel that the recall applies to. For scene memory
recall, this field is blank.
For timecode, you can independently adjust the hours, minutes, seconds,
and frames values.
3. Use the CURSOR buttons to select the DUPLICATE icon and press
the [ENTER] button to duplicate the selected event.
The selected event can be duplicated or deleted using the DUPLICATE and
DELETE icons. When the Selected CH parameter is checked, only events
corresponding to the selected channel are listed, useful for editing an
automix consisting of many events.
4. Use the CURSOR buttons to select the DELETE icon and press
[ENTER] to delete the selected event.
When the SYNC icon is pressed, events occurring around the current
timecode address are displayed. The timecode counter below the SYNC
icon displays the incoming timecode. When the CAPTURE icon below that
is pressed, the current timecode address is captured and displayed in the
window below. Up to eight timecode addresses can be captured, and they
are stored when the 02R is turned off. The parameter next to the CAPTURE
icon is used to select the addresses. When the LOCATE icon is pressed,
events occurring about the captured timecode address are displayed.
When the INSERT icon is pressed, a new scene recall event is inserted at
the captured timecode address. The new event can be edited as required.