Effects - Yamaha 02R Version 2 Manual

108 Internal Effects
1. Use the [AUX 7] button to
locate the AUX 7 2/3
page.
AUX 7
EFF1
2. Select an icon using the
cursor buttons.
3. To change the value of
the selected item,
rotate the encoder
wheel until the desired
value is shown.
02R User's Guide

Effects

The 02R is equipped with two internal multi-effects stereo processors.
These processors have a startling range of special effects available to apply
to your mix—shimmering reverbs, clean, precise delays, flanging and
chorus, and a myriad of other effects are available.
Shown below is the AUX 7 2/3 page.
The top of the page shows the effects LIB icon, an effects curve or icon
(which changes depending on the selected effect), and a level meter for the
effects return channel.
The bottom of the page shows the controls for adjusting the parameters for
the currently selected channel. These control parameters change depending
on the selected effects. Use the cursor buttons to select the desired icon and
adjust its value with the encoder wheel.
Note: Only one effects program can run on an effects processor. This means that
all the channel auxiliary sends that are set to, for example, AUX 7 will be processed
by the program that is currently running on Effect Processor 1. The current effect
program can be stored in scene memory.