Yamaha 02R Version 2 Manual page 246

Using the Transport
Controls
1. Use the CURSOR buttons
to select a transport
icon.
2. Press the [ENTER] button
to operate the selected
automix control.
Transport Controls
The following five operations have been made as icons: AUTOREC, REC,
PLAY, STOP, ABORT. Use the CURSOR buttons to select the desired
operation and press the [ENTER] button.
AUTOREC—Selecting this icon will start AUTOMIX recording when the
02R receives timecode, even if it is not in REC ready mode. You can use
this key when you do not want to press the REC ready key many times.
Note: A channel must be selected with its [SEL] button in order for any automix
events to be recorded.
REC—Selecting this icon will cause the unit to enter REC ready mode.
The icon will flash. The 02R starts recording when it receives timecode
during REC ready mode. The icon will be highlighted. Selecting this icon
during AUTOMIX playback will cause the 02R to enter REC ready mode.
Selecting the PLAY icon will start a punch-in recording.
Note: A channel must be selected with its [SEL] button in order for any automix
events to be recorded.
PLAY—Selecting this icon when timecode is being received and the
AUTOMIX is stopped will play back the automix. Selecting this icon
while the 02R is in record ready mode will start a punch-in recording.
Note: A channel must be selected with its [SEL] button in order for any automix
events to be recorded.
STOP—Selecting this icon will stop the playback and/or recording of the
AUTOMIX. When recording is stopped, the data will be stored as the new
current mix.
ABORT—Selecting this icon will stop the playback or recording of the
AUTOMIX. When the recording is stopped, the data will be discarded.
(Internally, the data is stored in memory for the undo operation.)
Automix 147
02R User's Guide