Yamaha 02R Version 2 Manual page 279

180 MIDI
02R User's Guide
Pro Tools
02R controls can be used to remotely control the following parameters of a
Pro Tools system.
02R Controls
Faders MIC 1–16
[ON] buttons MIC 1–16
CURSOR buttons and [ENTER]
button
Pro Tools Setup
Pro Tools 4.0x—In the MIDI Controller area of the Peripheral dialog box,
set the MIDI Controller type to either MM16 or DC16. Select 16 as the
number of channels. Set the "Receive From" and "Send To" parameters
accordingly.
Older version (only 8 tracks are controllable)—In the MIDI Controller
area of the Peripheral dialog box, select CS-10 as the Device. Set the "Port"
parameter accordingly.
With Pro Tools version 4.0x or later up to 16 tracks can be controlled from
the 02R. With earlier versions only eight tracks can be controlled.
Use the cursor buttons to select the Rewind, Fast Forward, Stop, Play, and
Record transport icons, and the [ENTER] button execute each function.
Note that [ON] button presses are not recorded by the automix.
Parameters on the
Pro Tools System
Track levels 1–16
Mute 1–16
Rewind, Fast Forward, Stop, Play,
Record