Yamaha 02R Version 2 Manual page 34

Setting the Frequency
1. Select the frequency (F) icon for the LOW band using the CURSOR
buttons.
2. Use the encoder wheel to sweep through the frequency range.
Alternatively, you could use the EQUALIZER F control.
All four bands of the 02R parametric EQ cover virtually the entire audio
spectrum, from 21 Hz to 20.1 kHz. Although they are labelled LOW,
L-MID, H-MID, and HIGH, the frequency of the bands can actually be in
any order.
Note: If your 02R is busy processing some complex data, it may take a little time
to update the EQ curve. However, the internal EQ circuits reflect your
adjustments immediately.
Note: As well as the frequency value in Hz displayed under the icon and on the
numeric LED in the SELECTED CHANNEL—EQUALIZER controls, the dotted
vertical line on the EQ graph indicates the current frequency position.
3. Use the CURSOR buttons to select the frequency (F) icon for the
L-MID band and adjust its position with the encoder wheel. Select
the other bands and adjust their frequency.
You can also select the EQ bands using the [LOW/HPF], [L-MID],
[H-MID], and [HIGH/LPF] buttons of the SELECTED
CHANNEL—EQUALIZER controls. Adjust the EQUALIZER F control for
each band.
Introductory Recording Tutorial 27
02R Getting Started Guide