Recording Superimposed Images On A Tape - Samsung VP-D907 Owner's Instruction Book

Advanced Recording

Recording Superimposed images on a tape

✤ Insert a tape for recording into your camcorder.
✤ Insert a Memory Stick with still images recorded into your camcorder.
1. Set the camcorder to CAMERA mode. (see page 29)
2. Press the MENU button.
I
The menu list will appear.
3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR.
4. Select MEMORY MIX from the submenu and push the MENU SELECTOR.
5. Move the MENU SELECTOR to select the desired MEMORY MIX mode (see page 54) and
push the MENU SELECTOR.
I
Your currently recording image is combined with the last recorded image on the Memory Stick.
6. Press the (FWD)/
7. Move the MENU SELECTOR to adjust the mix level.
I
Push the MENU SELECTOR to confirm the MEMORY MIX mode.
8. To exit, press the MENU button.
I
Your selected MEMORY MIX mode is flashed in the display.
9. Press the MEMORY MIX button.
I
The still image is superimposed on the moving image.
I
Each time you press the MEMORY MIX button, your selection is activated (display lights
continuously) or deactivated (display flashes).
10.Press the START/STOP button to start recording.
I
The superimposed images are recorded onto the tape.
Note
I
If you change the position of the power switch, you must select a still image for MEMORY MIX
again.
(REV) buttons to select the still image you want to superimpose.
ENGLISH
CAM MODE
INITIAL
CAMERA PROGRAM AE
WHT. BALANCE
A/V
MEMORY D.ZOOM
VIEWER EIS
DSE SELECT
MEMORY MIX
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
CAM MODE
CAMERA SET [07/07]
MEMORY MIX
M.CHROMA
M.LUMI
C.LUMI
M.OVERLAP
STBY
0 : 4 3 : 0 1
3 4 min
M.OVERLAP
55 55