Recording Superimposed Images On A Tape - Samsung VP-D97I Owner's Instruction Book

Advanced Recording

Recording Superimposed images on a tape

Insert a tape for recording into your camcorder.
Insert a Memory Stick is recorded still images into your camcorder.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR.
4. Select MEMORY MIX from the submenu and push the MENU SELECTOR.
5. Move the MENU SELECTOR to select the desired MEMORY MIX mode and push the
MENU SELECTOR.
Your currently recording image is combined with the last recorded image.
6. Press the (FWD)/
7. Move the MENU SELECTOR to adjust the mix level.
Push the MENU SELECTOR to confirm the MEMORY MIX mode.
8. To exit, press the MENU button.
Your selected MEMORY MIX mode is flashed in the display.
9. Press the MEMORY MIX button.
The still image is superimposed on the moving image.
Each time you press the MEMORY MIX button, your selection is activated (display lights
continuously) or de activated (display flashes).
10.Press the START/STOP button to start recording.
The superimposed images are recorded onto the tape.
Note
If you turn the position of the power switch, select your still image for MEMORY MIX again.
(REV) buttons to select the still image you want to superimpose.
ENGLISH
CAM MODE
INITIAL
CAMERA PROGRAM AE
WHT. BALANCE
A/V
MEMORY D.ZOOM
VIEWER EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
STBY
CAM MODE
CAMERA SET [07/07]
MEMORY MIX
M.CHROMA
M.LUMI
C.LUMI
M.OVERLAP
51 51