Battery Level Display - Samsung VP-D907 Owner's Instruction Book

ENGLISH
Preparation

Battery level display

• The battery level display indicates the amount of power remaining in the battery pack.
a. Fully charged
b. 20~40% used
c. 40~80% used
d. 80~95% used
e. Completely used (flickers)
(The camcorder will turn off soon, change the battery as soon as possible)
✤ Please refer to the table on page 25 for approximate continuous recording times.
✤ The recording time is affected by environmental temperature and conditions.
The recording time becomes very short in a cold environment.
The continuous recording times in the operating instructions are measured using a fully charged battery pack at 77°F(25°C).
As the environmental temperature and conditions may differ when you actually use the camcorder, the remaining battery
time may not be the same as the approximate continuous recording times given in these instructions.
✤ The grey bar shown here to indicate battery level, is actually white in the LCD monitor (or viewfinder). For example, on the
LCD monitor (or viewfinder), "a" (full) will be displayed as a full white bar, and "e" (empty) will be displayed as a battery outline
with the background image behind it.
Tips for Battery Identification
A charge mark is provided on the battery pack to help you remember whether it has been
charged or not.
Two colours are provided (red and grey). You may choose which one indicates charged and
which indicates discharged.
Note
I
The charge mark setting does not affect the battery's charge status.
26
a
b
c
d
e