Controlling Sound From The Speaker - Samsung VP-D907 Owner's Instruction Book

ENGLISH
Basic Recording

Controlling Sound from the Speaker

The Speaker works in PLAYER and M.PLAY mode.
I
When you use the LCD monitor for playback, you can hear recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER or
M.PLAY mode.
1. Set the power switch to PLAYER.
2. Press (PLAY/STILL) to play the tape or moving picture.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
I
A volume level display will appear on the LCD monitor.
Levels may be adjusted from anywhere between 00 to 19.
I
If you close the LCD monitor while playing, you will not hear sound from the speaker.
Notes
I
When the cable is connected to the Multi AV jack, you cannot hear sound from the speaker
and cannot adjust the volume.
I
If a cable is connected to the Multi AV jack, you can hear sound from the speaker when
AV IN/OUT MODE on MENU is set to AV IN or S-VIDEO IN. (VP-D907i/D907Di only)
I
You can hear sound from speaker by removing the connected cable from the Multi AV jack.
36 36
2
3-1
<3-2>
0 : 2 3 : 4 7 : 1 3
5 5 min
VOL. [ 1 1 ]
1 0 : 0 0
10 . J A N . 2 0 0 4
<PLAYER MODE>
<3-3>
MJPEG
0 0 : 0 8 / 0 0 : 2 1
DCAM0047. AVI
VOL. [ 1 1 ]
1 0 : 0 0
10 . J A N . 2 0 0 4
<M.PLAY MODE>