Advanced Recording
G
EIS (Electronic Image Stabilizer)
✤ The EIS function works in CAMERA mode only.
✤ EIS (Electronic Image Stabilizer) is a function that compensates for any shaking or hand movement while holding the
camcorder (within reasonable limits).
✤ It provides more stable pictures when:
I
Recording with the zoom
I
Recording a small object close-up
I
Recording and walking at the same time
I
Recording through the window of a vehicle
1. Set the camcorder to CAMERA mode. (see page 29)
2. Press the MENU button.
I
The menu list will appear.
3. Move the MENU SELECTOR highlight to CAMERA and push the MENU SELECTOR.
I
The sub menu list will appear.
4. Move the MENU SELECTOR to activate the EIS function, push the MENU SELECTOR.
I
The EIS menu is changed to ON.
I
If you do not want to use the EIS function, set the EIS menu to OFF.
5. To exit, press the MENU button.
Notes
I
It is recommended that you deactivate the shake compensation function when using a tripod.
I
If you use the EIS function, the picture quality may deteriorate.
I
While setting the EIS to ON, the WIDE [16:9] and STROBE(DSE function) mode do not work.
ENGLISH
CAM MODE
INITIAL
CAMERA
PROGRAM AE
WHT. BALANCE
A/V
MEMORY
D.ZOOM
VIEWER
EIS
DSE SELECT
MEMORY MIX
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
51
51