Using The Built - In Flash; Flash Select - Samsung VP-D907 Owner's Instruction Book

Advanced Recording

Using the Built - in Flash

✤ You can take natural looking flash pictures with appropriate illumination using the built-in flash or attaching the VL-S1FL
video Light/ Flash (optional) to the camcorder's Smart shoe (see page 109), whether they are night scenes, in doors or in
other dark places.
I
OFF : The flash does not fire.
I
(Auto) : The flash comes on depending on the brightness of the subject.
I
(Flash on) : The flash comes on regardless of the brightness of the subject.
I
(Red-eye reduction auto : built-in flash only) : The flash pre-fires automatically before the main firing to reduce the
G FLASH SELECT
✤ The FLASH function works in CAMERA and M.REC mode.
✤ If the FLASH mode is set to off, there is no FLASH ICON in the LCD monitor.
1. Set the camcorder to CAMERA mode or M.REC mode. (see page 29)
2. Press the (FLASH) button.
3. Each time you press the
(FLASH ON), (RED-EYE REDUCTION AUTO), off.
I
Warning! Do not fire the flash with the flash bulb covered with your hand.
I
Do not fire the flash close to people's eyes.
Notes
I
While using the following functions, you cannot use the FLASH function:
- PROGRAM AE, SHUTTER SPEED, EXPOSURE, STROBE (DSE function),
SLOW SHUTTER, CONTINUOUS SHOT, MEMORY MIX
- When you are recording movies onto a tape.
I
If the flash is forced to fire (Flash on) in a bright location, the flash effect may not be seen on the recorded picture.
I
When (Red-eye reduction auto) is set, the flash fires twice-once to perform red-eye reduction and the second for taking
the main picture. There is approximately a 1.5 seconds gap between flashes.
(FLASH) button, FLASH mode is changed to
red-eye.
(AUTO),
ENGLISH
67 67