ENGLISH
Maintenance
After finishing a recording
✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium Ion Battery Pack, leaving the pack
on the camcorder can reduce the life span of the battery.
Hence, it should be removed from the camcorder.
After completing a recording session
1. Slide the TAPE EJECT switch in the direction
of the arrow.
I
Opening the cassette door ejects the tape
automatically.
I
Please wait while the tape is completely
ejected.
2. After removing the tape, close the door and
store the camcorder in a dust free environment.
I
Dust and other foreign materials can cause
square-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion
Battery Pack.
I
When disconnecting a power supply, separate it in the reverse
order as connecting it, by referring to page 19.
I
Hold down the BATTERY RELEASE button and slide the
battery pack in the direction of the arrow.
✤
✤
1
2
3
4
OFF
1.
I
I
2.
I
3.
4.
I
19
I
99
99