Demonstration - Samsung VP-D530 Owner's Instruction Book

ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more easily.
The DEMONSTRATION function may only be used in the CAMERA
mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
The DEMONSTRATION function only works without a
TAPE installed.
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (when the tape is not inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY, CUSTOM,
NIGHT CAPTURE) during the DEMONSTRATION mode,
the DEMONSTRATION stops temporarily and resumes 10 minutes later
if you do not operate any other functions.
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
1.
CAM MODE
INITIAL CLOCK SET
2.
CAMERA REMOCON
A/V REC LAMP
MEMORY BEEP SOUND
VIEWER SHUT.SOUND
DEMO
3.
4.
5.
CAM MODE
INITIAL SET
CLOCK SET
REMOCON
6.
REC LAMP
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
10
10
41 41