Audio Dubbing; Dubbing Sound - Samsung VP-D530 Owner's Instruction Book

ENGLISH
Advanced Recording

Audio dubbing

✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape,
recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.

Dubbing Sound

1. Set the camcorder to PLAYER mode.
I
If you want to use an external microphone,
connect the microphone to the external
MIC input jack on the camcorder.
I
When you wish to dub using the External
A/V input, connect the AUDIO/VIDEO cable to
the camcorder by inserting the cable jack into
the Multi AV in/out terminal at the front side
of the camcorder.
2. Press the (PLAY/STILL) button and
find the time frame of the scene to be dubbed.
3. Press the (PLAY/STILL) button to
pause the scene.
4. Press the A.DUB button on the Remote Control.
I
A.DUB will be displayed on the LCD.
I
The camcorder is in a ready-to-dub state for dubbing.
5. Press the (PLAY/STILL) button to start dubbing.
I
Press the (STOP) button to stop the dubbing.
Notes
I
You can not use the audio dubbing function while playing a write protected
video tape.
I
When you wish to dub using the External A/V input, you must connect the
AUDIO/VIDEO cable to the audio system from which you wish to record.
I
You can not use the audio dubbing function while the Multi AV cable is
connected to TV.
I
You can not use the DV terminal while adding sound.
I
You can not dub sound on a pre-recorded in LP mode or 16 bit mode.
66 66
✤
AUDIO DUBBING
✤
✤
✤
CRM-D3E
MENU
I
I
I
Multi A/V
I
I
LP
12
1.
I
I
A/V
Multi A/V
2. /
3. /
4.
I
I
5. /
I
STOP
A/V /
DV
16
/