Additional; Maintenance - Samsung HMX-Q10BN User Manual

Additional infolrmation
MAINTENANCE
The suggesSons below will help you fulfill any warranty obligations
and allow you to enjoy this product for many years,
• For safe,keeping of the camcorder, turn off the camcorder.
- Remove the battery.
- Remove the memory card.
• To clean the lens
Use a blower brush to remove dust, and then wipe the lens gently
with a soft cloth.
If necessary, wipe gently with lens paper or tissue.
Mold may form if the bns is left dirty.
If the bns looks dim, turn off the camcorder and leave it off for
about 1 hour.
Before cleaning, turn off the camcorder and remove the battery.
• To clean the exterior
- Wipe gently with a soft dry cloth. Do not apply excessiw_ force
when cleaning. Gently rub the surface.
- Do not use benzene or thinner to clears the camcorder. The
exterior coating could peel off or the case could deteriorate.
• To clean the LCD screen
Wipe very gently with a soft dry cloth. Be careful not to damage
the screen.
• To prolong its service lif_), do not rub the LCD screen with a
coarse cloth.
• Be aware of the following LCD screen phenomena. They are not
mallunctions.
When you use the camcorder, the surface around the LCD
screen may heat up.
If you leave the power on for a long time, the surface around
the LCD screen becomes hot.
When using the camcorder in cold conditions, an afterimage
may appear on the LCD screen.
• An LCD screen is manufactured using advanced technology
which creates screens with pixel failure rates of less than 0.01%.
However, a black or bright spot (red, blue, white) may appear in
the center of the LCD screen and up to two spots may appear
outside the center. These spots, which are normally incurred
during the manufacturing process, do not aff_)ct the recorded
images.