Preparation; Connecting A Power Source; To Use The Ac Power Adapter And The Dc Cable; To Select The Camcorder Mode(Vp-D590/D590I/D590T/D590Ti Only) - Samsung VP-D530 Owner's Instruction Book

ENGLISH

Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
camcorder.
- The AC Power Adapter and AC cord : used for indoor recording.
- The Battery Pack : used for outdoor recording.
To use the AC Power adapter and DC Cable
1. Connect the AC Power adapter to the
AC cord.
2. Connect the AC cord to a wall socket.
Note
I
The plug and wall socket type may
differ according to your resident
country.
3. Connect the DC cable to the DC jack
socket of the camcorder.
4. Set the camcorder to each mode by holding down the tab
on the power switch and turning it to the CAMERA, PLAYER,
M.REC, M.PLAY mode.
To select the CAMCORDER mode
(VP-D590/D590i/D590T/D590Ti only)
✤ If you want to use this unit as a camcorder, set the mode
switch to TAPE position. (CAMERA, PLAYER)
✤ If you want to use this unit as a DSC (Digital Still Camera),
set the mode switch to MEMORY STICK position.
(M.REC, M.PLAY)
-
-
4
Power
Switch
2
3
1
4.

VP-D590/D590i/D590T/D590Ti

✤
✤
1.
2.
I
3.
DSC
19 19