Moving One Track - Kenwood MDX-01 Instruction Manual

Moving one track

Use the following procedure to select a track
and move and insert it to the position of the
desired track number. Multiple tracks can be
moved and reordered by repeating the pro-
cedure for each track. The track numbers
before and after the moved track are ad-
justed automatically.
Image of moving a single track
A B C
A C D
100 0
& ()
QZ
SPACE CHARAC. /DELETE
P.CALL
4
SET
ENTER
TUNING
DOWN
CD / FM/AM
ENTER
REPEAT MD /
AUTO/MANU.
RANDOM
SOUND SLEEP
TONE
VOLUME
RC-MDX0001
Remote control only
1
Select the MD input and in-
sert a recordable MD.
2
Press the 4 or ¢ key re-
peatedly to select the track
number to be moved.
The track will be played back.
D E F
E B F
POWER
/
TITLE SEARCH
TITLE INPUT
TRACK EDIT
10
TRACK EDIT
:
CLEAR
PGM
SET
¢
TUNING
UP
STOP MD O.T.E.
DISPLAY
TIMER TIME DISPLAY
3
Press the TRACK EDIT key
repeatedly until "3 MOVE ?"
is displayed, then press the
SET key.
If "X MOVE" is displayed, the subsequent
operation will not be available (see page 53).
4
Press the 4 or ¢ key re-
peatedly to select the move
destination position where you
want to insert the moved track.
Display when a track has been moved after track no.4.
5
Press the SET key.
6
Press the ENTER key.
7
Eject the MD.
"WRITING" is displayed.
To cancel the MOVE operation in the
middle :
Press the TRACK EDIT key any time before
the end of step 5.
Editing can be canceled provided that it is
attempted before "WRITING" is displayed.
For the procedure, see "Canceling editing"
(page 44).
÷ Be careful not to apply vibration to the unit while
"WRITING" is displayed, because the MD recorder
is writing recorded and edited data in the MD in
this period. Also, to avoid loss of recorded and
edited data, do not unplug the power cord before
"WRITING" disappears.
Blinks
37
EN