Table of Contents
Advertisement
The time adjusts automatically to the correct local time.
NOTE
The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
Selectable Illumination
You can switch the color of the button illumination between
green and red.
Display and setting:
"Button Color Green" : The color of the illumination is green.
"Button Color Red" : The color of the illumination is red.
Switching Display Mode
You can select the display mode of this unit.
Display and setting:
"Display Type A" : Divide the display into the upper and lower
parts to separately provide different
information. (Vertical division display) (page
10) (Default setting)
"Display Type B" : The display will turn on by using only the
upper part of the display and clock.
"Display Type C" : Use the entire display to provide a single
type of information. (Full screen display)
(page 9)
Icon/Spectrum analyzer Select
This function permits switching of the spectrum analyzer
display.
Display and setting:
1
Select the display "Icon/Speana Select" during the selecting
function in the menu system.
Pressing the 4 or ¢ button switches the Icon/Spectrum
2
analyzer.
Font Select
You can change the font used on the display.
Display and setting:
1
Select the display "Font Select" during the selecting function in
the menu system.
Pressing the 4 or ¢ button switches the font on the
2
display.
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire
is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
— 35 —
Advertisement
Table of Contents
