Selectable Illumination; Dsi (Disabled System Indicator); Theft Deterrent Faceplate - Kenwood KRC-459R Instruction Manual

Turning TEL M ute Function After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
Select able Illum inat ion
You can sw itch the colour of the button illumination betw een
green and amber.
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Selectable
Illumination function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "COL GRN" or "COL AM B"
in the display, indicating that the current colour is green or
amber, respectively.
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.
D SI (D isabled Syst em Indicat or)
A red indicator blinks on the unit after the faceplate is
removed, w arning potential thieves. The factory default for
this function is "ON".
Turning Disabled System Indicator On/ Off:
1
Hold dow n the M ENU button for one second or more.
"M ENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly until the Disabled System
Indicator function appears in the display.
Press the 4 button to search in the other direction..
The function setting is indicated by "DSI ON" or "DSI OFF" in
the display, indicating that the disable system indicator is on or
off, respectively.
Downloaded from: http://www.usersmanualguide.com/
3
Sw itching settings
Press either the AM button or FM button.
The display and setting w ill change.
4
Press the M ENU button to end the menu mode.
Thef t D et errent Faceplat e
The faceplate of the unit can be detached and taken w ith you,
helping to deter theft.
Projections
Grooves
Removing Faceplate:
Press the release button.
The faceplate is unlocked, allow ing you to detach it.
N OTE
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case w hilst detached.
• Do not expose the faceplate or its storage case to direct sun-
light or excessive heat or humidity. Also avoid places w ith too
much dust or the possibility of w ater splashing.
Reattaching Faceplate:
1
Align the projections on the unit w ith the grooves on the face-
plate.
2
Push the faceplate in until it clicks.
The faceplate is locked in place, allow ing you to use the unit.
— 25 —
Release button