Other Features; Audio Control Setting.19; Table Of Audio Control Setting.19; Selectable Illumination.19 - Kenwood KRC-603C Instruction Manual

Other features
(See page 8}
Audio Control Setting
Adjust various parameters of sound quality.
1 Press the AUD button to enter the control mode
Each time the AUD button is pressed, the adjustment mode
display changes as follows:
p► Bass ► Treble ► Balance ► Fader -
'-Volume ◄ N F Level (only when being switched KRC 503 only!
<■
If you do not move
to
stop
?
m fuo
soronds.
the unit will
switch back to the volume adjustment mode (that is the nor¬
mal mode)
NOTE
Source tone memory
Each source (tape, FM, AM and disc changer) has its own memo¬
ry in which to store the bass and treble tone settings.
The settings made for a particular source are recalled automati¬
cally whenever you use that source (for example, FM mode uses
the tone settings made for FM, AM for AM, etc ).
2 Press the v/a buttons to adjust the mode shown in the dis¬
play.
Use the following table as a guide for adjusting the settings in
each mode.
Table of Audio Control Setting
Adjustment
mode
(Display)
Operation of Audio control button
v button button
Bass
("BAS")
Bass decreased.
Bass increased.
Treble
(" THE ")
Treble decreased Treble increased.
Balance
("BAL")
Left channel empha¬
sized.
Right channel empha¬
sized.
Fader
("FAD")
Rear channel
increased.
Front channel
increased.
Non-Fading
Preout Level
r'NF")
(KRC-503
only)
Front and rear chan¬
nels (including pre¬
out) emphasized.
Non-fading sound
emphasized.
NOTE
The balance of the non-fading sound cannot be adjusted.
Function of the KRC-603C/503
Selectable Illumination
You can switch the color of the button illumination between
green and amber.
Switching the iflumination:
Press the ILLUM button for at least one second to switch
between amber and green.
19